Husqvarna 2013 TC 250R Workshop Manual page 177

ENGINE REASSEMBLY
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Make sure the spring (15) of the gear shift lever shaft is positioned correctly.
Check the gear shift lever shaft (16) and the slot of the gear selector mechanism
for signs of wear.
Lubricate the shaft with engine oil and insert the shaft (16) into the crankcase
so that the fork (17) slides over the ratchet detent and the spring (18) locates
to its abutment pin.
Workshop Manual Ed. 07-2012
H.29