Firmware - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Using the Web Browser Interface for Basic Configuration Tasks
Managing Files, Firmware, Boot Software, and the AutoSynch™ Function
14-10
Figure 14-6. Delete Config File
1. In the Delete Config File section, use the pull-down menu to display all
the files on flash and cflash and select the file you want to delete.
2. Click the Delete button to erase the file. A confirmation dialog box is
displayed.
3. Click OK to delete the file.
For information about advanced file management functions such as renaming
uploading or downloading files, see Chapter 1: Overview.

Firmware

The Firmware section allows you to manage Secure Router OS files. You can
select the Secure Router OS file that is loaded when the ProCurve Secure
Router. You can also upload new OS files and delete old files.
Be careful when setting and managing router firmware; setting the wrong file
may prevent your router from booting with the proper configuration or even
from booting at all.
Set Primary/Backup Firmware. The Secure Router OS, or firmware, files
have the .biz extension. The primary firmware file is always named SROS.BIZ.
From the Web browser interface, you can select the firmware file that the
router loads when it is booted.
1. Click Utilities > Firmware in the left navigation bar. The Set Primary /
Backup Firmware window is displayed.