HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 630

Using the Web Browser Interface for Basic Configuration Tasks
Managing Files, Firmware, Boot Software, and the AutoSynch™ Function
N o t e
14-8
3. To set the secondary startup config file, click the desired configuration
file from the pull-down menu.
4. To save these changes to the running-config file, click Apply.
If the AutoSynch function is enabled, the primary and backup startup-config
files and locations are automatically set and cannot be changed.
Save-Config. The Save-Config window allows you to save the running-
config file to the startup-config file. The current configurations will be
saved, and the router can then boot with these configurations after it is
powered down.
Click the Save button. If the AutoSynch feature is enabled, the running-config
is saved as startup-config on both the internal flash memory and the compact
flash card.
Figure 14-3. Save Config
Download Config. The Download Config section allows you to save the
startup-config to a file on your PC. This feature is particularly useful when you
must configure several routers with similar settings and you need to edit the
configuration to tailor it to another router.
Figure 14-4. Download Config
1. Click the Download button. The File Download window with the Open,
Save, Cancel, and More Info buttons is displayed. The file is automatically
named <hostname>-<date>.cfg. For example, if you configured your
router's hostname as HQRouter and today's date were May 5, 2007, the
filename would be HQRouter-05-05-2007.cfg.