Hardware Overview; Procurve Secure Router Front Panel; Console Port - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

Hardware Overview

router's current OS and upload any necessary upgrades. You can click Reboot

and restart the router, and you can also set up a Telnet session by clicking

Telnet to Unit.

In the CLI, boot and configuration files are referred to as software. In the Web

browser interface, the boot and configuration files are called firmware.

For more information on how to configure your ProCurve Secure Router using

the Web browser interface, see Chapter 14: Using the Web Browser Interface

for Basic Configuration Tasks.

This section provides a brief overview of external features, slots, and modules

on the ProCurve Secure Router 7000dl Series. The ProCurve Secure Router

7000dl Series includes two models: the ProCurve Secure Router 7102dl and

the ProCurve Secure Router 7203dl. Both models include two narrow module

slots. The ProCurve Secure Router 7203dl also includes one wide module slot.

To make accessing the router and connecting it to other devices more conve-

nient, the console interface and all physical link ports are located on the front

panel of the router. The front panel of each router includes two Ethernet

interfaces and two narrow dl option module slots that can house your two

choices from among ten narrow modules. The ProCurve Secure Router 7203dl

also provides a wide module slot to support up to eight additional T1 or E1

The following sections briefly introduce the features on the front of your

ProCurve Secure Router.

The console port, which is a DB-9 DTE male connector, allows you to manage

the ProCurve Secure Router locally. To access the CLI, use the serial cable

(5184-1894) supplied with the router to connect the console port to the COM

port on your laptop or PC. (See Figure 1-4.)

Table of Contents