HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 697

Secure router procurve 7000dl series

Hide thumbs Also See for ProCurve Secure 7000dl Series:

Table of Contents

When you configure the G.703 or DSX-1 interface, the settings you enter

should match those used by your private branch exchange (PBX). To configure

the G.703 or DSX-1 interface from the Web browser interface, complete the

following steps:

From the left navigation bar, click Physical Interfaces. The Physical

Interfaces window is displayed.

Select the G.703 or DSX-1 interface. The configuration window for that

interface is displayed.

Figure 14-55.Configuration Window for G.703 Interface

Enter a description in the Description box if you want to document

information about the G.703 or DSX-1 interface. This information will be

displayed in the running-config under the appropriate interface heading.

Using the Web Browser Interface for Basic Configuration Tasks

E1 + G.703 and T1 + DSX-1 Modules

Chapters

Table of Contents