Configuring Passwords to Control Management Access to the Router
Configuring a Password for Console Access
To configure a password for console access, complete these steps:
1.
Select Passwords in the left navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2.
Select the Console tab.
Figure 14-17. Configuring Passwords for Console Access
3.
Select the Use local user list option if you want to use the usernames and
passwords configured in this list for console access.
4.
Select the Use password option if you want to configure a separate
password for console access.
5.
If you want to use a RADIUS or TACACS+ server to control console
access, then you must enable the AAA subsystem. See "Using the AAA
Subsystem to Control Management Access" on page 14-27 for instructions
on configuring these options.
6.
Click Apply.
Using the Web Browser Interface for Basic Configuration Tasks
14-23