Download New Firmware Option - HP StorageWorks N1200 User Manual

Serial/Telnet User Interface

Download New Firmware Option

To download a new version of the firmware:
1. Select 5) Download a New Revision of the Firmware in the router Main
2. Respond to the confirmation prompt.
3. Select Transfer, Send File in the terminal emulator utility.
4. Select the location of the firmware.
5. Select XMODEM as the transfer protocol.
6. Press the Send button.
Figure 89: Download Firmware Menu
142
Menu.
A confirmation prompt is displayed.
If necessary, use Browse to search for the file.
The firmware will begin downloading to the router.
When the download process is complete, the system verifies that the firmware
image was successfully written to the FLASH memory and reboots. When the
router is rebooted, it detects that there is a newly downloaded firmware image,
copies that image to the boot sector of the FLASH, and boots using the new
image.
Figure 89 is an illustration of the Download Firmware Menu after a new
version of the firmware has been loaded.
Network Storage Router N1200 User Guide