Configuring Authentication Using A Tacacs+ Server - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Configuring Passwords to Control Management Access to the Router
e. For TCP Port, accept the default port unless the RADIUS server is
operating on a different port.
f. For Retries, configure the number of attempts that the ProCurve
Secure Router will make to contact the RADIUS server.
g. For Timeout, configure the number of seconds that the ProCurve
Secure Router will wait to receive a reply from the RADIUS server.
h. Click Apply to save the settings for the RADIUS server.
5. Select the tab for the type of access you want to configure:
• Enable Password
• Telnet
• Console
• SSH
• HTTP
• FTP
6. Select the Use remote RADIUS server option.
7. Click Apply to save your settings.

Configuring Authentication Using a TACACS+ Server

If you want to use a TACACS+ server to authenticate users who access the
router, you must enable the AAA subsystem.
1. Select Passwords in the left navigation bar and scroll to the bottom of the
Add/Modify/Delete Users window.
2. In the Service Authentication section, select AAA Mode Enabled.
3. Click Apply to enable the AAA subsystem.
4. Configure the settings for a TACACS+ server.
a. Select the TACACS+ tab.
Using the Web Browser Interface for Basic Configuration Tasks
14-29