Reboot Option; Download New Firmware Option - HP M2402 User Manual

Serial/Telnet User Interface

Reboot Option

To reboot the router, in the Main Menu, select Reboot (4).
After this option is selected, a confirmation prompt is displayed. If a positive
response is given to the confirmation message, the router is restarted.
Note:

Download New Firmware Option

To download a new version of the firmware:
1. From the router Main Menu, select Download a New Revision of the
2. Respond to the confirmation prompt.
3. In the terminal emulator utility, select Transfer, Send File.
4. Select the location of the firmware.
5. Select XMODEM as the transfer protocol.
6. Press the Send button.
7. The firmware will begin to download to the router.
When the download process is complete, the system verifies that the firmware
image was successfully written to the FLASH memory and reboots. When the
router is rebooted, it detects that there is a newly downloaded firmware image,
copies that image to the boot sector of the FLASH, and boots using the new
image.
Figure 120
of the firmware has been loaded.
174
Current router activities will be disrupted during a reboot.
Firmware (5).
A confirmation prompt is displayed.
If necessary, use Browse to search for the file.
is an illustration of the Download Firmware Menu after a new version
Network Storage Router M2402 User Guide