Defining A Radius Server; Defining A Tacacs+ Server; Enabling 802.1X Supplicant Status - HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual

Controlling Management Access to the ProCurve Secure Router
Quick Start
2-48
9. Assign the named list to a console, Telnet, or SSH line. From the appro-
priate line configuration mode context, enter:
Syntax: accounting commands [1 | 15] [default | <named list>]

Defining a RADIUS Server

Define the IP address of the RADIUS server and the key that the ProCurve
Secure Router must use to authenticate to the server (if a key is required).
From the global configuration mode context, enter:
Syntax: radius-server host <A.B.C.D> key <key>
Replace <A.B.C.D> with the RADIUS server's IP address and replace <key>
with the shared key for the RADIUS server.

Defining a TACACS+ Server

Define the IP address of the TACACS+ server and the key that the ProCurve
Secure Router must use to authenticate to the server (if a key is required).
From the global configuration mode context, enter:
Syntax: tacacs-server host <A.B.C.D | hostname> <key>
Replace <A.B.C.D> with the server's IP address or replace <hostname> with
the hostname of the TACACS+ server. Replace <key> with the shared key.

Enabling 802.1X Supplicant Status

To enable the router to function as a supplicant:
1. Move to the configuration mode context for the Ethernet interface that
you want to use to access the 802.1X-secured network.
ProCurve(config)# interface eth 0/1
ProCurve(config-eth 0/1)#
2. Configure the supplicant username and password:
Syntax: port-auth supplicant username <username> password <password>
ProCurve(config-eth 0/1)# port-auth supplicant username ProCurve password
ProCurve
The default username is "username," and the default password is
"password."
3. Enable the interface's supplicant functionality by entering the following:
ProCurve(config-eth 0/1)# port-auth supplicant