HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 691

Figure 14-52.PPPoE Configuration Window
6. Configure IP settings. For Address Type select one of the following.
• None—Select this setting if you intend to set up a bridge group with
the PPP interface.
• Static—Select this setting if you want to configure a static IP address.
The boxes to enter the IP address and subnet mask are displayed, so
that you can enter the appropriate address for the PPP interface.
• Negotiated—Select this setting if you want the PPP interface to
negotiate an IP address from your service provider.
Using the Web Browser Interface for Basic Configuration Tasks
Configuring ADSL Interfaces
14-69