HP ProCurve Secure 7000dl Series Basic Management And Configuration Manual page 633

Managing Files, Firmware, Boot Software, and the AutoSynch™ Function
Figure 14-7. Set Primary/Backup Firmware
2. Use the pull-down menu for the Primary Firmware box to select the file
you want for your primary firmware. This file should be cflash SROS.BIZ.
3. To set the backup firmware, use the pull-down menu for the Backup
Firmware box to select the file you want for your backup software. This
file should be SROS.BIZ.
This window also shows the current memory statistics for the internal flash
and cflash drives. The Flash memory statistics are displayed as the bytes used /
the total memory and the drive space free. The CFlash memory statistics are
displayed below the Flash statistics in the same format.
It is always a good idea to keep track of the amount of memory you have
available when saving multiple configurations to your router. For information
about deleting files, see "Delete Config File" on page 14-9.
Using the Web Browser Interface for Basic Configuration Tasks
14-11