18.1 Overview
You can configure the system password in the User Account screen.
18.2 The User Account Screen
Use the User Account screen to configure system password.
Click Maintenance > User Account to open the following screen.
Figure 128 Maintenance > User Account
The following table describes the labels in this screen.
Table 79 Maintenance > User Account
LABEL
User Name
Old Password
New Password
Retype to Confirm
Apply
Cancel
VMG1312-T10C User's Guide
C
DESCRIPTION
You can configure the password for the admin account.
Type the default password or the existing password you use to access the system in
this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change the
password, use the new password to access the Device.
Type the new password again for confirmation.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
HAPTER
User Account
1 8
187