Table of Contents
Advertisement
Chapter 1 Introducing the Device
You can configure your wireless network in either the built-in Web Configurator, or using the WPS
button.
Figure 5 Wireless Access Example
1.7.1 Using the WLAN/WPS Button
If the wireless network is turned off, press the WLAN/WPS button at the back of the Device for
one second. Once the WLAN/WPS LED turns green, the wireless network is active.
You can also use the WLAN/WPS button to quickly set up a secure wireless connection between
the Device and a WPS-compatible client by adding one device at a time.
To activate WPS:
Make sure the POWER LED is on and not blinking.
1
Press the WLAN/WPS button for five seconds and release it.
2
Press the WPS button on another WPS-enabled device within range of the Device. The WLAN/WPS
3
LED flashes orange while the Device sets up a WPS connection with the other wireless device.
Once the connection is successfully made, the WLAN/WPS LED shines green.
4
To turn off the wireless network, press the WLAN/WPS button on the front of the Device for one to
five seconds. The WLAN/WPS LED turns off when the wireless network is off.
22
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
