Ethernet Summary Screen; Figure 128 Network > Interface > Ethernet; Table 48 Network > Interface > Ethernet - ZyXEL Communications ZyWALL 1050 User Manual

ZyWALL 1050 User's Guide

10.2.2 Ethernet Summary Screen

This screen lists every Ethernet interface and virtual interface created on top of Ethernet
interfaces. To access this screen, click Network > Interface.
Figure 128 Network > Interface > Ethernet
Each field is described in the following table.
Table 48 Network > Interface > Ethernet
LABEL
#
Name
IP Address
Mask
Modify
184
DESCRIPTION
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the interface.
This field displays the current IP address of the interface. If the IP address is
0.0.0.0, the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (STATIC)
or dynamically assigned (DHCP). IP addresses are always static in virtual
interfaces.
This field displays the interface's subnet mask in dot decimal notation.
This column lets you create, edit, remove, activate, and deactivate interfaces.
You cannot add or remove Ethernet interfaces, however.
To create a virtual Ethernet interface, click the Add icon next to the
corresponding Ethernet interface. The Virtual Interface Add/Edit screen
appears. See Section 10.8 on page
To edit an interface, click the Edit icon next to it. The Ethernet Edit screen or
Virtual Interface Add/Edit screen appears accordingly.
To remove a virtual interface, click the Remove icon next to it. The ZyWALL
confirms you want to remove it before doing so.
To activate or deactivate an interface, click the Active icon next to it.
213.
Chapter 10 Interface