Table of Contents
Advertisement
DBC 425
SIP
WITH
FOR
10.13
10.14
10.14.1
10.14.2
81
MX-ONE
Changing Network settings
The network settings can be checked by selecting Network menu in the
Settings menu. Changing of IP addresses, are handled by the mainte-
nance personnel, see installation instructions for DBC 425 .
An example of the Network menu is:
Figure 65:
Password or PIN Menu
Select Settings and then the Password or PIN menu. The following can
be done from this menu:
•
The end-user can change the PIN that is used when registering the
telephone to the system
•
If the end-user does not use a PIN or a password, it is possible to
avoid showing the PIN or Password menu in the display each time
the telephone is registered
Change PIN
To change the PIN, do the following:
1.
Select Change PIN
2.
Enter the current PIN and press OK
3.
Enter the new PIN and press OK
4.
Confirm the new PIN and press OK
Show Password Menu
Select Password (No) and press Change (F3) to change between Yes
or No.
14/1553-ANF 901 54 Uen E 2009-11-04
Advertisement
Table of Contents
