Configuring General Phone Settings - Aastra 6739i User Manual

Personalizing your phone
Add new device
<Remove device>

Configuring general phone settings

This section explains other settings you can make on your phone.
Selecting the language
You wish to select a different user language for your display.
The user language on your phone is configured using the Aastra Self Service Portal.
For more information about the Aastra Self Service Portal, please refer to chapter
"Aastra Self Service
Note:
Aside from English, your Aastra SIP phone supports four other languages. If the
selected language is not shown on your phone, then you must first restart the
phone (see chapter
Selecting the time and date
The settings for the time and date are made by your system administrator. The follow-
ing chapter is thus intended for your system administrator or technician, who will
then set the time and date for you.
56
Adding and pairing a new Bluetooth device:
1. Press the softkey.
2. Activate the device you want and press the
3. Select a new Bluetooth device from the list.
4. Enter the PIN of the Bluetooth device and confirm with OK.
➔
If the pairing was successful, the Bluetooth device is displayed on a soft-
key with a green box. The Bluetooth symbol in the status bar of the screen
is displayed when a Bluetooth device is active on your phone.
➔
If the pairing was unsuccessful the Bluetooth device is displayed on a
softkey with a red box .
Removing a Bluetooth device:
1. Press the softkey next to the Bluetooth device you want to remove from
your phone.
2. Answer Yes to the security question.
Notes:
• The list is limited to 4 Bluetooth devices. Remove a device before you con-
nect another one.
• An activated Bluetooth mode does not imply that a Bluetooth connection is
running.
Portal", page 7.
"Restarting the phone", page 59).
Search softkey.
Aastra 6739i
eud-1626/1.0 – R3.0 – 12.2013