Invacare Kite Service Manual page 47

®
Invacare - Kite
·
Pull the rubber caps (2) off of both battery terminals (1).
·
Use the 11 mm socket wrench to loosen and remove the battery terminal screws.
·
Remove the battery cable.
·
Pull the battery (3) out onto the rear cover by its belt (4).
·
Remove the battery.
·
Pull the second battery towards you by its belt and repeat the previous steps.
Installing batteries:
·
Install the batteries in reverse order.
·
Make sure the battery box sockets and plugs are correctly installed. A diagram showing how to
connect the battery terminals correctly can be found in the rear cover.
SERVICE MANUAL
47