Replacing A Standard Backrest With Quick Release - Invacare Kite Service Manual

®
Invacare - Kite

8.16.2 Replacing a standard backrest with quick release

Requirements:
· 5 mm Allen key
· open-ended spanner, 10 mm
· open-ended spanner, 13 mm
Dismantling the backrest unit:
·
Remove the backrest cushion.
·
Use two 13 mm socket spanners to undo the bolts (4) including the nuts and washers on the
left-hand and right-hand side of the chair.
·
Pull the quick release cord (5) to unlock the backrest tube.
·
Remove the backrest tube (1) from the backrest holders (2).
·
If the backrest fixations are to be replaced also:
Loosen and remove the hexagon socket head screws (3) including the nuts and washers on
the left and right side of the chair. Use a 5 mm Allen key and a 10 mm socket wrench for this
purpose.
Refitting the backrest unit:
·
Replace the parts in the reverse order.
·
To conclude, you should always carry out a trial run to test the vehicle functions.
SERVICE MANUAL
99