Backrest Unit; Replacing The Standard Backrest - Invacare Kite Service Manual

®
Invacare - Kite
8.16

Backrest unit

8.16.1 Replacing the standard backrest

Requirements:
· 5 mm Allen key
· open-ended spanner, 10 mm
· open-ended spanner, 13 mm
Dismantling the backrest unit:
·
Remove the backrest cushion.
·
Undo and remove the handwheels (3).
·
Use two 13 mm socket spanners to undo the bolts (4) including the nuts and washers on the
left-hand and right-hand side of the chair.
·
Remove the backrest tube (1) from the backrest holders (2).
·
If the backrest holders also need to be replaced: Undo and remove the Allen screws (5)
including the nuts and washers on the left-hand and right-hand side of the chair. To do this,
use a 5 mm Allen key and a 10 mm socket spanner.
SERVICE MANUAL
97