Replacing The Head Lamps Completely (Conventional Lighting System) - Invacare Kite Service Manual

®
Invacare - Kite
8.7.5

Replacing the head lamps completely (conventional lighting system)

Requirements:
· Phillips screwdriver size 2
· Side cutting pliers
· Cable ties
Uninstalling head lamps:
·
Switch the electronics OFF on the remote.
·
Remove the rear and the middle covers, as described in chapter 8.1.1 und 8.1.2.
·
Take exact note of the positions of all cables and the sockets that they are connected to. Mark
the connectors and sockets or take a photograph with a digital camera.
·
Disconnect the plug (2) of the appropriate headlight from the lighting circuit board (1).
·
Pull the headlight cable out of the wheelchair. If necessary, also remove the cable ties.
SERVICE MANUAL
57