®
Invacare
- Kite
8.19.2 Adjusting the backrest width
The backrest width is adjusted by performing the following tasks:
·
Adjust the backrest tube.
·
Adjust the backrest:
- Sling backrest, as described in chapter 8.16.4.
- Flex3 backrest, as described in chapter 8.19.3.
·
Replace the backrest cushion (these are available in various widths).
When modifying the backrest width, the seat width must also be correspondingly adapted. Please
see chapter 8.19.1.
Requirements:
· 3 mm Allen key
· 5 mm Allen key
· 13 mm Open-ended spanner
The screw position for the backrest width, refer to the table:
Screw position
Seat width
A
530 mm
B
480 mm
C
430 mm
D
380 mm
SERVICE MANUAL
113