Replacing The Tail Light Bracket (Conventional Lighting System) - Invacare Kite Service Manual

®
Invacare - Kite
8.7.9

Replacing the tail light bracket (conventional lighting system)

Requirements:
· Phillips screwdriver size 2
· 8 mm socket wrench
· 4 mm Allen wrench
· 5 mm Allen wrench
Uninstalling the tail light bracket:
·
Remove the complete tail light, as described in chapter 8.7.8.
·
Loosen the screw on the seat frame that goes through the drill hole of the light bracket, using a
5 mm Allen wrench.
·
Remove the hexagon socket head screw. Pay attention to the distance washer (1).
·
Use a 4 mm Allen wrench to loosen the hexagon socket head screw (6).
·
Remove the hexagon socket head screw. Pay attention to the distance washer (5) and the
distance tube (3).
·
Replace the lamp bracket (4).
Installing the headlight bracket:
·
Assemble all parts again in reverse order.
·
Check all vehicle functions.
SERVICE MANUAL
63