Replacing The Headlight Bracket (Conventional Lighting System) - Invacare Kite Service Manual

®
Invacare - Kite
8.7.6

Replacing the headlight bracket (conventional lighting system)

Requirements:
· TX25 Torx wrench
· Phillips screwdriver size 2
If the headlight does not need to be replaced:
·
Loosen both Phillips screws (1).
·
Detach the headlight (2) from its holder.
·
Carefully put the headlight aside on its cable.
If the headlight does need to be replaced:
·
Remove the headlight, as described in chapter 8.7.5.
SERVICE MANUAL
59