Rear (Base) Tractor - IBM V03 Maintenance Information

Rear (base) tractor

Base tractor (rear tractor when a second tractor is installed): This tractor is installed at the factory on all
machines. In a single tractor machine the base tractor is the front tractor. The base tractor becomes the ( rear
tractor when a second (optional) tractor is installed.
Perform the following procedure first:
Remove the Front (optional, second) tractor.
Then:
1. Disconnect the rear-tractor connector cable.
2. Remove the 2 screws and carefully lift the tractor out.
Chapter 5. Removals, service checks and adjustments
242