Paper feed motor
CAUTION:
<2-25> High temperature; switch off the printer and allow at least 20 minutes for parts in this area to cool before
handling.
Screws
Belt
Perform the following procedures first:
1. Remove the Rear cover.
2. Remove the Top cover asm..
3. Remove the Printer mechanical assembly.
Then:
1. Loosen the paper belt tension lever screws through the
access holes in the frame, and remove the paper drive belt
from the paper feed motor gear.
Note the path of the belt.
2. Remove the 3 mounting screws and remove the motor.
Installation notes
Perform the Paper feed belt.
Chapter 5. Removals, service checks and adjustments
226