Top Access Cover - IBM V03 Maintenance Information

Top access cover

1. Lift the top cover
2. Remove the 2 self-locking nuts.
3. Remove the 2 spring-tensioning nuts.
4. Remove the 8 cup-spring washers.
5. Using care not to lose the 2 brass washers, push the 2 bolts
out and remove the top cover
Installation notes:
1. Install the cover spring as, as shown.
2. Carefully assemble the 8 cup-spring washers as shown here:
| )( )( )( )( )( )( )( )( |
3. Tighten the 2 spring-tensioning nuts so that the top cover
opens and closes easily and balances in any position.
Chapter 5. Removals, service checks and adjustments
199