Removals
Overview
Installation procedure assumption
Assume that the installation procedure for a FRU is the reverse of the removal procedure. Any differences
will be described under "Installation notes" for that FRU.
Paper path nomenclature
Base tractor (rear tractor when a second tractor is installed): This tractor is installed at the factory on all
machines. In a single tractor machine the base tractor is the front tractor. The base tractor becomes the ( rear
tractor when a second (optional) tractor is installed.
Second tractor (optional, becomes front tractor): This tractor can be installed in front of the base tractor as an
option. In a two tractor machine the second (optional) tractor is the front tractor and the base tractor becomes the
rear tractor .
Covers
Rear cover and top cover asm.
Rear cover:
DANGER
<1-13> Do not connect or disconnect a communication port, a teleport, or any other connector during an
electrical storm.
Chapter 5. Removals, service checks and adjustments
192