IBM V03 Maintenance Information page 129

Table 20. T&D error messages and actions (continued)
Error Message Description
TD (**) FRU 2 15 AFTA failure
TD (**) FRU 2 16 Front tractor sense
failure
TD (**) FRU 2 16 Rear tractor sense
failure
TD (**) FRU 2 17 Front tractor sense
failure
TD (**) FRU 2 27 Carriage movement
failure
TD (**) FRU 0 28 Microcode error
TD (**) FRU 0 29 Microcode error
TD X FRU 4 20-40 T&D error
Action
1. See Standard AFTA service check and adjustment.
2. Replace the logic board (see Logic board).
3. Replace the AFTA motor assembly (see Automatic
forms thickness adjust (AFTA) assembly).
1. Clear front feed paper jam rear tractor path.
2. See Tractor asm. service checks.
3. Replace the logic board (see Logic board).
4. Replace the tractor cable assembly.
1. Clear rear feed paper jam rear tractor path.
2. See Tractor asm. service checks.
3. Replace the logic board (see Logic board).
4. Replace the tractor cable assembly.
1. Clear front feed paper jam front tractor path.
2. See Tractor asm. service checks.
3. Replace the logic board (see Logic board).
4. Replace the tractor cable assembly.
1. See Printhead drive service check.
2. Replace the logic board (see Logic board).
3. Replace the encoder board and cable (see Encoder
board).
4. Replace the encoder strip (see Encoder board).
5. Replace the printhead cables.
Replace the logic board (see Logic board).
Replace the logic board (see Logic board).
1. Power off the printer and start the T&D procedure
again.
2. Replace the logic board (see Logic board).
129
Chapter 2. Diagnostics