Rx Settings - Toshiba DP120F Service Manual

1.4 RX Settings

1.4.1 Secure Reception
There are occasions when you may wish to secure access to incoming documents. Secure RX
allows you to receive documents to memory until a security code is entered. This ensures that
only users with the correct security code may retrieve documents. In addition, the Secure RX
can be setup to automatically be activated during a specified time period.
To setup Secure RX, a 4-digit security code must be programmed first. After programming the
security code, you can specify the time period during which the Secure RX will be active. 24-
hour coverage for specific days of the week is selectable. This section describes the procedure
for programming a security code or changing an existing security code.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option, then press the [ENTER] key.
(1)
SECURE RX
01.SECURITY CODE
02.ACTIVITY MODE
SECURITY CODE
To select a security code for the first time or to change an existing security code.
Go to next step.
ACTIVITY MODE
To set the activity period for Secure RX function.
Go to step (4).
If the security code already exists and you wish to change the current code, go to Step 4.
When you enter a security code for the first time, go to Step 5.
(2) Enter your new 4-digit security code. The screen shown below is displayed to confirm
your entry. Then press [ENTER] key.
If a new code needs to be entered:
SECURITY CODE ENTRY
NEW CODE
SECURITY CODE=
DP120F/DP125F Function Settings
[MENU], [4], [3], [01]
If the code already exists:
SECURITY CODE ENTRY
CURRENT CODE
SECURITY CODE=
4-34 March 2000 © TOSHIBA TEC