Toshiba DP120F Service Manual page 14

13. MONITOR Key
Used to enable the speaker monitor, for monitoring call progress during non memory docu-
ment feeder transmissions.
14. START Key
Press this key to start facsimile communication. This key is also used to complete pro-
gramming.
15. STOP Key
Used to stop an operation or cancel system programming. This key is also used to clear an
error condition.
16. COPY Key
Press this key, with a document in the Document Tray, to copy a document.
17. TX REPORT Key
Press this key to request or disable a Transmission Report for your current transmission
job.
18. MODE Key and FINE, U-FINE, HALFTONE Lamps
Selects the desired resolution for transmission or copying. When Standard mode is se-
lected, none of the MODE lamps will be illuminated.
19. Menu Keys (
These keys are used to scroll and highlight desired LCD menu prompts.
The is also used as the [TONE] Key. The
services requiring touch-tone dialing when you are connected to a Rotary line.
20. ENTER Key
Press this key to enter a selected menu item or select a menu entry.
21. JOB CANCEL Key
Used to cancel a job reserved or being executed.
22. E-MAIL ADDRESS Key
Used to program E-mail addresses when programming One Touch Key or Abbreviated
Numbers. By pressing this key prior to a transmission, an E-mail address can be entered
for an Internet FAX transmission.
23. JOB STATUS Key
Displays the communication status of reserved transmissions.
24. One Touch Keys (1-49), One Touch Keys (50-73), Function keys, and Keyboard.
View the One Touch Keys (1-49), One Touch Keys (50-73), Function Keys, and Keyboard
by turning the Flip Panels.
DP120F/DP125F Introduction
, , , Keys)
key is helpful to access various
1-12 March 2000 © TOSHIBA TEC