1.7 Automatic Supply Order
1.7.1 Destination Setup
(1)
Enter the destination fax number using One touch dialing, Abbreviate dialing or keypad
dialing, then press the [ENTER] key.
DESTINATION SETUP
ENTER TEL NUMBER,
SPEED DIAL KEY OR
ONE TOUCH KEY
If the destination fax number has already been registered the following screen is dis-
played.
SUPPLY ORDER SETUP
1.MODIFY
2.RETAIN
You may select one of the following two options.
MODIFY
Allows you to change the destination fax number.
RETAIN
Retains the destination fax number.
(2)
After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [5], [04], [1]
4-55
DP120F/DP125F Function Settings