Upper Tray - Toshiba DP120F Service Manual

(4) Draw out the upper Recording paper tray. When the absence of a Recording paper tray is
detected, the screen below appears. After checking that the screen is displayed, install
the Recording paper tray.
Detects the absence of an
upper Recording paper tray
SWITCH TEST
INSERT THE UPPER
TRAY
<Remarks>
<Remarks>
(5) Remove the Process unit. When the absence of a Process unit is detected, the screen
below appears. After checking that the screen is displayed, install the Process unit.
Detects the absence of
a Process unit
SWITCH TEST
PUT IN THE PROCESS
UNIT
<Remarks>
March 2000 © TOSHIBA TEC
Install the Recording
paper tray
If no recording paper is placed in the Recording paper tray, the screen
below is displayed. You can resume the test by loading the paper.
SWITCH TEST
LOAD PAPER IN THE

UPPER TRAY

If the Optional recording paper tray is installed, follow the same test proce-
dure as above for the middle and lower Recording paper trays.
Install the
Process unit
If no Bypass tray is installed or no recording paper is placed in the Bypass
tray, the screen below is displayed.
If a new Bypass tray is installed or no paper is placed in the Bypass tray,
select "1. YES" and press the [ENTER] key to perform the test starting
from step (6).
If no Bypass tray is installed, select "2. NO" and perform the test starting
from step (7).
DOES THIS MACHINE
HAVE A BYPASS TRAY?
1.YES
2.NO
SWITCH TEST
REMOVE THE PROCESS
→
UNIT
SWITCH TEST
UNLOAD PAPER IN THE
→
BYPASS TRAY
11-11 DP120F/DP125F Troubleshooting