Toshiba DP120F Service Manual page 462

2.3.3 MODEM PBA (Line 2)
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
The MODEM PBA (Line 2) is an option for DP120F, and equipped with DP125F as standard.
(1) Remove the PBA unit. (Refer to "2.3.1 PBA Unit.")
(2) Remove the two screws from the MODEM PBA. Disconnect the connector on the modem
PBA from CN8 on the main PBA to remove the MODEM PBA.
(3) Reassemble the components in the reverse order of disassembly.
NOTE: Carefully handle the boards that are directly connected together to avoid
damaging the connectors and boards.
DP120F/DP125F Removal/Replacement
Main PBA
Fig. 8-2-56
8-42
MODEM PBA
CN8
March 2000 © TOSHIBA TEC
08-02-56