Toshiba DP120F Service Manual page 617

(2) Load the documents in the document tray and press the [START] key. The documents will
be transported one by one and the number of documents unloaded will be displayed at the
lower right on the screen.
ADF TEST
<Remarks>
(3) To end the test, press the [STOP] key.
ADF TEST
PAGE NUMBER CORRECT?
1.YES
2.NO
Use the [ ↑ ] or [ ↓ ] key to select "1.YES" or "2.NO", and then press the [ENTER] key.
(4)
If the number of documents loaded is consistent with the number of documents unload,
select "1.YES." If a document is not unloaded even once, select "2.NO."
(5) The "OPERATION COMPLETED" message is displayed and the unit returns to the test
item select screen of the INDIVIDUAL TEST.
<Remarks>
March 2000 © TOSHIBA TEC
After transporting all
the documents
PAGES 001
If a document jam occurs during transport, the screen below is displayed.
Remove the jammed documents. You can resume the test by pressing the
[START] key.
ADF TEST
DOCUMENT JAM
PAGES XXX
The result of the ADF TEST can be checked with the self test report. For
printing the self test report, refer to "1.3 TEST RESULT LIST" on page 11-
14.
If the result of the ADF TEST is judged to be NG, replace the ADF pad
assembly and Pinch rollers by referring to "Chapter 8 Removal/Replace-
ment/Adjustment" on pages 8-21 and 8-24.
ADF TEST
START TO RESTART OR
→
STOP TO COMPLETE
11-5
PAGES XXX
DP120F/DP125F Troubleshooting