Toshiba DP120F Service Manual page 542

2.6.12 Optional Paper Empty Sensor
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the optional recording paper tray block. (Refer to "2.6.1 Optional Recording Pa-
per Tray Block.")
(2) Remove the optional recording paper tray. (Refer to "2.6.2 Optional Recording Paper Tray.")
(3) Stand the optional recording paper tray block on its rear side.
(4) Disconnect the connector from the optional paper empty sensor.
(5) Remove the two screws from the bottom plate, and remove the bottom plate.
DP120F/DP125F Removal/Replacement
Connector
Fig. 8-2-152
8-122
Bottom plate
Optional paper empty sensor
08-02-152
March 2000 © TOSHIBA TEC