Toshiba DP120F Service Manual page 523

2.5.4 Paper Empty Sensor
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the recording paper tray. (Refer to "2.1.1 Recording Paper Tray.")
(2) Stand the machine on its rear side.
(3) Disconnect the connector from the paper empty sensor.
(4) Remove the two screws from the bottom plate, and remove the bottom plate.
March 2000 © TOSHIBA TEC
Fig. 8-2-130
8-103
Bottom plate
Paper empty sensor
Connector
DP120F/DP125F Removal/Replacement
08-02-130