(6)
Set the recording paper and adjusting the paper size by the Paper guide.
(7)
Lower the tray lever.
Tray lever
(8)
Reinstall the Bypass tray cover in the reverse order.
(9)
After assembling, turn the Power switch ON, and check the following:
• "Switch test" in "Individual test" of test mode. (Refer to page 11-10.)
• "Sensor test" in "Function test" of test mode. (Refer to page 11-20.)
• Load the document and press the [COPY] key. Check if copying and feeding normally
take place from Bypass tray.
DP120F/DP125F Installation
Paper guide
Recording paper
Fig. 3-5-13
Fig. 3-5-14
3-30
3-5-13
3-5-14
March 2000 © TOSHIBA TEC