Toshiba DP120F Service Manual page 427

2.1.5 Rear Cover
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the slide cover. (Refer to "2.1.4 Slide Cover.")
(2) Remove the two screws from the PBA unit. Then push down the lever of the PBA unit in
the direction of the arrow and draw out the PBA unit.
PBA unit
(3) Open the top cover.
(4) Remove the four screws from the rear cover, and lift the rear cover to remove.
(5) Reassemble the components in the reverse order of disassembly.
NOTE: When installing the rear cover, align the five hooks of the rear cover with the
holes of the base frame and the inside cover.
March 2000 © TOSHIBA TEC
Lever
Fig. 8-2-8
Hook
Hook
Fig. 8-2-9
8-7
Rear cover
Hook
DP120F/DP125F Removal/Replacement
08-02-08
08-02-09