1.7.5 MEMORY DUMP LIST
This list outputs a listing of RAM contents organized. The following are the items to be re-
corded.
ADDRESS
Memory start address. Even if the number other than 0 (zero) is entered as the lowest
digit, it is outputted as "0" on the list.
HEX DATA
Actual memory contents.
ASCII
Data obtained by converting the memory contents into ASCII codes.
Use the [ ↑ ] or [ ↓ ] key to select the "05.MEMORY DUMP LIST", and then press the
(1)
MEMORY DUMP LIST
ADDRESS=
[ENTER] key.
<Remarks>
MEMORY DUMP LIST
SIZE=
(2)
Enter a 6-digit address, and then press the [ENTER] key.
(3)
Enter the size of the 4-digit address to be printed, and then press the [ENTER] key. To
stop the operation at any time, press the [STOP] key.
<Remarks>
(4)
After completion of the list output, the display returns to the standby mode screen. For a
sample list, refer to "12. APPENDIX" on page 12-5.
DP120F/DP125F Troubleshooting
XXXXXX
To enter the value, use the following keys.
0 to 9:
Dial keys
A to F: One touch key 01 to 06
YYYY
Address + Size = Memory dump address
000100 + 1FFF = 20F0
[MENU], [9], [6], [05]
11-40
March 2000 © TOSHIBA TEC