(6)
Remove the one screw from the sensor plate, and remove the sensor plate.
(7)
Release the hooks of the optional paper empty sensor, and remove the optional paper
empty sensor.
(8)
Remove the paper empty actuator.
Paper empty actuator
(9)
Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the sensor test referring to the "Chapter 11:
1.5.4 SENSOR TEST" on page 11-20.
March 2000 © TOSHIBA TEC
Sensor plate
Fig. 8-2-153
Optional paper empty sensor
Fig. 8-2-154
8-123
DP120F/DP125F Removal/Replacement
08-02-153
08-02-154