Toshiba DP120F Service Manual page 83

1.2.9 Print Density Setting
The print density for reception, copy, PC printing and report printing can be set.
Use the [ ← ] or [ → ] keys to move the cursor to the desired position and press the
(1)
[ENTER] key.
SET PRINT DENSITY
DENSITY (-2 TO +2)=
LIGHTER
-2 -1 0 +1 +2
DENSITY
Set a value in the range from -2 (LIGHTER) to +2 (DARKER).
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
1.2.10 Document Length
This setting selects whether or not a DOCUMENT JAM error will result when the received
document is longer than the specified length.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (1m or UNLIMITED), then press the
(1)
[ENTER] key.
DOCUMENT LENGTH
1.1m
2.UNLIMITED
1m
Allows the received document size of up 1 meter long (39.4 inches); a longer document
will cause a DOCUMENT JAM error.
UNLIMITED
Any length of document is acceptable.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
DARKER
4-17
[MENU], [4], [1], [06]
[MENU], [4], [1], [07]
DP120F/DP125F Function Settings