Toshiba DP120F Service Manual page 76

1.2.5 Power Saver
This setting allows you to minimize power consumption by turning power off to portions of the
machine (as selected). If the Power Saver function is ON, a warm up period is needed before
printing occurs. This facsimile has two Power Saver modes: Super Power Saver and Printer
Power Saver.
Super Power Saver turns virtually all power off to minimize power consumption. Select one of
three modes, Automatic, Manual or OFF.
Printer Power Saver turns only the fuser section off during the time period selected.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (SUPER P.S. or PRINTER P.S.), then
(1)
press the [ENTER] key.
01.SUPER P.S.
02.PRINTER P.S.
SUPER P.S.
To select the SUPER POWER SAVER mode.
PRINTER P.S.
To select the PRINTER POWER SAVER mode.
When SUPER P.S. is selected:
The screen below is displayed.
Use the [ ↑ ] or [ ↓ ] keys to select one of the three options (AUTOMATIC, MANUAL
1)
or OFF), then press the [ENTER].
SUPER POWER SAVER
1.AUTOMATIC
2.MANUAL
3.OFF
AUTOMATIC
To select the Automatic Super Power Saver mode.
MANUAL
To select the Manual Super Power Saver mode. When this mode is selected, the
operator selects/deselects Super Power Saver by way of a key on the operator Con-
trol Panel.
DP120F/DP125F Function Settings
[MENU], [4], [1], [02]
4-10 March 2000 © TOSHIBA TEC