Toshiba DP120F Service Manual page 87

1.2.15 Collate Copy
When copying documents, the COLLATE function may be selected. This function will sort mul-
tiple page copies into sets of correct-order pages.
This setting establishes the default for the Collate Copy function. Collate Copy may, also, be set
manually at the time the copy operation is performed.
NOTES: • The pages are automatically collated.
• Requires enough memory for the entire multi-page document. If there is not
enough memory (memory overflow), the copying procedure will be canceled.
• Collation is slower than non-collation because the entire document must be
scanned into memory first, then printing can occur.
• Collating is the responsibility of the operator.
• Memory requirements are limited to one page at a time.
Use the [ ↑ ] or [ ↓ ] keys to select the desired option (ON or OFF), then press the
(1)
[ENTER] key.
COLLATE COPY DEFAULT
1.ON
2.OFF
ON
The pages are automatically collated.
OFF
Not collated the paper.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [1], [12]
4-21 DP120F/DP125F Function Settings