Display
NETWORK ERROR
CHECK LINE-1
CHECK LINE-2
(Displayed only when LINE-
2 is installed)
DP120F/DP125F Troubleshooting
Cause
With the GF-1010 (Optional NIC)
installed, a network connection is
not detected.
LINE-1 is not connected to the tele-
phone line.
LINE-2 is not connected to the tele-
phone line.
11-50
Remedy
Insure you have a proper network con-
nection. If the same error message is
displayed again, call your service rep-
resentative.
Correctly connect a modular phone
cord between the telephone line jack
and the LINE-1 connector on the right
side of the machine.
Correctly connect a modular phone
cord between the telephone line jack
and the LINE-2 connector on the right
side of the machine.
March 2000 © TOSHIBA TEC