Rx Settings - Toshiba e-STUDIO170F Service Manual

4.1.6

RX Settings

[ 1 ] Secure Reception [MENU], [5], [4], [01]
There are occasions when you may wish to secure access to incoming documents. Secure RX allows
you to receive documents to memory until a security code is entered. This ensures that only users with
the correct security code may retrieve documents. In addition, Secure RX can be setup to automatically
activate during a specified time period.
To setup Secure RX, a 4-digit security code must be programmed first. After programming the security
code, you can specify the time period during which Secure RX will be active. 24-hour coverage for spe-
cific days of the week is selectable. This section describes the procedure for programming a security
code or changing an existing security code.
1) Use the [ ] or [ ] keys to select the desired option, then press the [ENTER] key.
SECURE RX
01 . SECURITY CODE
02 . SECURE RX
SECURITY CODE
To select a security code for the first time or to change an existing security code.
Go to next step.
SECURE RX
To set the activity period for Secure RX function.
Go to step 4.
If the security code already exists and you wish to change the current code, go to Step 4.
When you enter a security code for the first time, go to Step 5.
2) Enter your 4-digit security code. The screen shown below is displayed to confirm your entry. Then
press [ENTER] key.
If a new code needs to be entered:
NEW SECURITY CODE
[ ]
3) Enter the current security code.
SECURITY CODE
[ ]
January 2005 © TOSHIBA TEC
If the code already exists:
ENTER SECURITY CODE
[ ]
4 - 31
e-STUDIO170F Function Settings
4