2.4.17 Printer Frame Rear and Gears
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the rear cover. (Refer to "2.1.5 Rear Cover.")
(2)
Remove the front cover assembly. (Refer to "2.1.6 Front Cover.")
(3)
Remove the right side cover. (Refer to "2.1.7 Right Side Cover.")
(4)
Remove the inner cover. (Refer to "2.1.13 Inner Cover.")
(5)
Remove the fan motor. (Refer to "2.4.4 Fan Motor.")
(6)
Remove the ozone filter from the ozone filter guide. (Refer to "2.4.5 Ozone Filter Guide.")
(7)
Remove the main motor. (Refer to "2.4.6 Main Motor.")
(8)
Remove the top cover open switch. (Refer to "2.5.2 Top Cover Open Switch.")
(9)
Remove the three screws from the printer frame rear, and remove the printer frame rear.
DP120F/DP125F Removal/Replacement
Fig. 8-2-101
8-82
Printer frame rear
08-02-101
March 2000 © TOSHIBA TEC