After Installing A New Id Sensor Board - Ricoh Aficio MP C305SP Field Service Manual

• Do not use a dry cloth. Otherwise, the ID sensors may get dirtier due to static electricity.

After installing a new ID sensor board

Do the following adjustment after installing a new ID sensor board.
1. Plug in and turn on the main power switch of the machine
2. Enter the SP mode.
3. Enter all correction coefficients [A] for ID sensor with the SP modes referring to the barcode sheet
provided with the new ID sensor board.
• For example, enter "1.2" with SP3-331-046.
4. Exit the SP mode.
Paper Transfer
231