To Recall A Copy Program - Konica Minolta bizhub 362 User Manual

Additional copy operations

To recall a copy program

The registered copy programs can be recalled and used for copying.
1
Position the document to be copied. (Refer to page 4-9 for details.)
2
Press the [Mode Memory] key.
The Program screen appears.
3
Touch [Recall].
– To stop recalling a copy program,
press the [Reset] key or the
[Mode Memory] key.
Can the specified settings for a
?
copy program be checked?
% To check the program copy
settings before recalling the copy
program, refer to "Checking the
copy settings (Mode Check)" on page 5-3.
4
Touch the button for the program number registered with the desired
copy settings.
The program copy settings are recalled, and the Basics screen appears
again.
– If [Enter] is touched without touching a program number button, the
Basics screen appears again and no copy program is recalled.
5
Press the [Start] key.
Copying begins with the recalled copy settings.
bizhub 362/282/222
5
5-11