Documents That Can Be Placed On The Original Glass; Precautions For Positioning Documents On The Original Glass - Konica Minolta bizhub 362 User Manual

Copy paper/original documents

Documents that can be placed on the original glass

To copy documents that cannot be loaded into the ADF, position them on
the original glass.
Document type
Document size
Maximum weight

Precautions for positioning documents on the original glass

Observe the following precautions when placing the document on the
original glass.
- The size of documents printed on paper in metric sizes (such as A3, B4
and A4) cannot be automatically detected. The setting must be specified
by the technical representative. For details, contact the technical
representative.
- If a document of non-standard paper size is loaded, the "Auto Paper
Select" and "Auto Zoom" settings cannot be used since the document
size cannot be detected automatically. If a document of non-standard
paper size is loaded, select the size of the paper to be copied.
- If highly translucent or transparent documents, such as overhead
transparencies or diazo photosensitive paper, are loaded, the document
size cannot be detected automatically. Place a blank sheet of paper of
the same size over the document.
- Do not place objects exceeding 2 kg on the original glass, otherwise the
original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
bizhub 362/282/222
Original glass documents
Sheets, books (page spreads), three-dimensional objects
A3 w or less
11 e 17 w or less
2 kg
8
8-19